Very well maintained Scania suction / flushing truck with build from FICO.
Chassis only 99 500 km and on construction 4800 hours.
Specifications:
High Pressure Pump: Uraca 716G - 330 liters per minute and 140 bar pressure
Vacuum pump: Wittig RFW200D - 1250 m3/h and -0.6 in vacuum
Flushing hose 120 meters
Flushing hose 80 meters
Removable bulkhead in tank: Water in front / Sludge at the back
Vacuum tank 10-11 m3
Suction hose 4 inch cassette about 15 meters
Air-controlled road boom
Suspension hooks for extra suction hose on tailgate
Repairs last years:
Replaced MSSV valve 2016 - Water pressure control valve
Maintain high pressure pump. Replaced crankshaft and stock plus much more 2019
Overhauled / honed and replaced slats on compressor 2019
Taken out and overhauled plunger wall 2017
Webasto on build overhaul 2018
PLS (control unit) on building changed 2017
Remote control switched 2016/2017
Suction hose tower changed 2019
Disassembled oil separator for vacuum pump and washed inside 2018
Replaced bad hydraulic hoses and vacuum hoses inside engine room 2018/2019
Switched drum bearings and chain tightening to 1 inch flush hose in 2017
Tank flush system dismantled and renovated 2017
We reserve the right for errors in the advertisement