2021 Volvo FH 540 8x2 Crane truck w/ 2021 165 t/m HIDROKON crane w/ jib and winch and lots of equipment! WATCH VIDEO

Specifications:

• 2021 model
• 7350 km (will go a little)
• 721 Engine hours
• 241 Crane hours
• Euro 6 engine
• 8x2
• 551 HP
• Suspension on 1st and 2nd axle: Steel
• Suspension on 3rd and 4th axle: air
• 2 x 110 liter variable pumps
• 2 x manual extensions for main boom and 2 x for jib
• Scanreco optical remote control (Top model)
• Weight cell main boom
• Additional function for main boom and jib
• Auto leveling (The car puts itself in a level position ready for lifting.)
• Virtual space (Possibility to limit all axes with a few keystrokes, no need to open a workshop for this. Brilliant when working under high voltage etc.)
• SKF central lubrication ring and up to the first link
• Extra function all the way up the jib
• Single winch hook (Jib / main boom)
• 2 shear winch hooks (Jib / main boom)
• 4-point winch hook (Main boom)
• Hook for jib
• Hook for main boom (Large hook)
• N d lower the generator (24 volts)
• Cable stop sensor and sleeve
• 4 ton winch
• Diagnostic cable for online help (Remote help)
• Danfoss valve center
• 2 x 2 ton counterweight (M is only used for cranes above the cabin, otherwise the counterweights are not needed, and these can be removed as needed)
• Front support leg

Structure:

• 4 x work lights strategically placed inside each outrigger cabinet.
• 50" LED bar work light at the rear of the cab
• Powerful LED lights in the crane.
• VBG mount, with air servo control unit mounted in rear cabinet left side.
• Roof rack
• 2 high beam LED bar on roof forward (daylight!!).
• Orange work warning LED beam on the roof.
• EasyUp foldable ladder with side railing.
• Boxes for chains, screws, etc. Mounted on the rear support legs so that they are extended together with the support legs and are also packed away while driving.
• Charger for control in cabin
• Plastic inner fenders axle 3 and 4.
• 3 edge pull-out cabinet between axles 3 and 4
• On the left side between axles 2 and 3, a large cupboard with a 500 W fan heater is installed for hanging clothes to dry, etc.
• Flat / bottom rear closed with alloxed aluminum door panels that are cut to fit the car perfectly, with rounded edges for a very professional look.
• CNC manufactured plates up the back of the cabin.
• Fully painted sides, cabin and stern.
• Crane rest cradle for operation without jib.
• 5 pcs support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cribs at the back of the "plan"
• Right side large cabinet 1.2 x 1 meter
• Powerful LED reversing/rear work lights.
• The rear of the car was rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages.
• Hatches strategically placed for access to relevant facilities under the building.
• Precisely cut out panels in side coverage for access to screen, manual controls, emergency functions, etc.
• Marker lights along the side mounted so that they flash together with the turn signals/direction indicators
• Cradle for holding the jib when not in use.
• Hydraulic extra function dismantled main boom and jib, but can be installed if desired.
• Kettle in cabin
• Microwave oven in cabin
• Light
• Air conditioning/ac
• Ready for delivery

Description:

We have a 2021 Volvo FH 540 8x2 Crane Truck w/ 2021 165 t/m HIDROKON crane w/ jib and winch and lots of equipment for sale.
The car looks like new and has hardly been used. All services have been done at a reputable workshop.
There are 8 hydraulic extensions on the main boom and 6 hydraulic extensions on the jib.
Everything works as it should, according to the owner.
BR SEE!
Ready for delivery